:: |
Clean, wash or replace air filter |
:: |
Lubricate fan & motor bearings when necessary |
:: |
Inspect motor, blower wheel & clean if necessary |
:: |
Clean, wash evaporator & condenser coil |
:: |
Flush or vacuum tray & drain line |
:: |
Check compressor, oil, level, mounting spring, drier & refrigerant system |
:: |
Check electrical controls, safety device to ensure in satisfactory conditions |
:: |
Inspect thermostat, remote control & panel |
:: |
Wash infills, drip pan, sprinkler arms & change water |
:: |
Visually check valves, by-pass & float valve (adjust if necessary) |
:: |
Inspect flow switch, temperature & pressure gauge |
:: |
Check all pumps, adjust, & re-pack glands align couplings when necessary |
:: |
Instruct the serviceman responsible for the servicing to inform the clients if any defects had been found |
:: |
Submit checklist & service report |
